If you ever see sounds or collect vibration as soon as you brake with your Toyota Aygo 2, it can come from several problems. As a general rule, there is not always to worry, nevertheless it sometimes remains essential to pay attention to it and of course to remedy this concern. Sometimes a simple scrub of the part in question could work. Through this , we'll find out what to do to establish a diagnostic depending on the noise, and then what are the precautions to take.noise-braking-Toyota-Aygo-2

Whistling noise on your Toyota Aygo 2 front or rear brakes

If ever a noise of whistling arrives in your Toyota Aygo 2, it's usually due to brake pads. The symptom is similar if the noise comes from the rear or front brakes. Indeed, the lining of the brake pads turn out to be composed of a rubbery component, which will allow it to stick perfectly to the disc. When the material will wear out, the disc could reach the pad. So this is the friction that produces the rustling you hear. If this is indeed the case, it seems essential to change the brake pads. But it also seems likely that gravel or something else has slipped into the pads. Also in this case, a hissing sound can be heard. In this case, it is important to do control by a mechanic to be able to check if it could be dangerous. If it's at a squeak you have to do, you probably just need to get yourself a brake cleaner and spray it on the disc of this car.

Braking vibrations on your Toyota Aygo 2

All of this vibration au braking can be seen in different places. On the brake pedal naturally but also on the valance or at the checkout of this famous Toyota Aygo 2. In principle, these vibrations turn out to be linked to a veiled disc. You can see it visually by removing the wheel to be able to reach the disc. Be careful, in the event that it is indeed the disc that happens to be veiled, it seems extremely essential to change it without dragging, quite simply because it could damage other components of the system.

Your Toyota Aygo 2 squeaks except when you brake

It is therefore an inverse problem. Undeniably, as soon as you brake, the brake pads come into contact with the wheel, the shrill noise extinguishes promptly. This problem is probably caused by calipers. They happen to be too close to the wheel as soon as you don't brake. It is consequently this touching which produces the noise. At times it is enough to give a few abrupt brakes so that the calipers are replaced by themselves. In case this is not the case, it is necessary to change them!

Loud noise when braking

Supposing that this Toyota Aygo 2 emits a thud et metallic as soon as you brake, there is a good chance that it comes from your brake pads. Normally, the wear indicator is normally expected to light up. But it also happens at times that the latter does not trigger. Therefore, do not procrastinate and go to a professional. To have some worn pads at this point is enough careless. It seems imperative to change them.

Conclusion

You have gone around the question normally. Now that you have an overview of where your problème may come from, we nevertheless recommend that you go to a mechanic for a more in-depth diagnosis. Stay cautious!