If you see sounds or discern vibration as soon as you brake with your Kia clarus, it can come from various malfunctions. As a general rule, there is not necessarily to worry, nevertheless it is necessarily useful to pay attention to it and to repair this hassle. Sometimes, just scrubbing the affected part will sometimes suffice. Through this , we’ll find out how to set up a diagnostic taking into account the noise, and after which measures are to be taken.noise-braking-Kia-Clarus

Whistling noise on your Kia Clarus front or rear brakes

As soon as a noise from whistling appears with your Kia Clarus, it is generally due to brake pads. This manifestation is identical if the noise comes from the rear or front brakes. In fact, the lining of the brake pads turns out to be composed of a rubbery component, which makes it possible to adhere to the disc. When this component wears out, the disc will sometimes touch the pad. It's just the friction that produces the rustling you hear. Assuming that this is indeed this situation, it remains advisable to replace the brake pads. However, it is also likely that some gravel or something else has gotten into the pads. In this situation again, a hissing noise may be generated. It therefore seems advisable to do control by a mechanic in order to check if it could be problematic. If ever squeak that you think you have to do, it will probably be enough to acquire a brake cleaner and spray it into your drive of this auto.

Braking vibrations on your Kia Clarus

All of this vibration when braking can be distinguished in several places. Around the brake pedal naturally as well as on the valance or in the checkout of your Kia Clarus. Generally, these vibrations are due to a veiled disc. It is possible to check it visually by removing the wheel to gain access to the disc. Warning, in the event that it is the disc that is clouded, it is extremely useful to replace it without dragging, because it may degrade other elements of the system.

Your Kia Clarus squeaks except when you brake

In this case it is a reverse concern. In fact, as soon as you press, the brake pads will rest on the wheel, the shrill noise stops instantly. This concern must most likely come from calipers. They are really close to the wheel as soon as you don't step on the brake pedal. It is therefore this touch that produces the noise. Sometimes it will be enough to put back a few sudden blows of brakes for the calipers to replace themselves. If not, replace them!

Loud noise when braking

If your Kia Clarus produces a thud and metallic as soon as you step on the brake pedal, there is a good chance that it comes from your brake pads. If all goes well, the wear indicator is normally expected to activate. Only it also happens when it too does not trigger. In this case, do not procrastinate and go to a convenience store. To have some worn pads at this point is enough adventurous. It seems imperative to replace them.

Conclusion

We went around the question a priori. Now that you have an idea of ​​where the problème could come, we necessarily advise you to go to a mechanic for a more in-depth diagnosis. Go, roll!