Suppose you hear sounds or discern vibration when you brake with the Suzuki Alto 2, it could all come from different problems. Usually, there is not always to worry, but it is systematically essential to pay attention to it and to repair this concern. Sometimes a small scrub of the part in question may work. Within this , we’ll find out how to diagnostic taking into account the noise, and then what are the arrangements to put in place.noise-braking-Suzuki-Alto-2

Whistling noise on your Suzuki Alto 2 front or rear brakes

When a noise from whistling happens in your Suzuki Alto 2, it's usually related to brake pads. This phenomenon is usually identical in the case where the noise comes from the rear or front brakes. Indeed, the lining of the brake pads will be made of a rubber material, which will allow to adhere to the disc. When the component is damaged, the disc may touch the pad. This is actually friction that generates that hiss that you hear. Assuming that this is the situation, it is essential to replace the brake pads. But it is also plausible that pebbles or something else has become embedded inside the pads. In this case too, a hissing noise can be heard. It is also essential to do control by a professional so as to discern if it could be dangerous. In case it's a squeak that you think you can discern, it will certainly be enough to buy a brake cleaner and spray it on the disc of this vehicle.

Braking vibrations on your Suzuki Alto 2

The vibration when braking are able to discern in several locations. In the brake pedal of course, and why not on the valance or on the checkout your Suzuki Alto 2. Generally, this kind of vibration turns out to be due to a veiled disc. You can control it visually by removing the wheel to reach the disc. Small warning, in case it is really the disc that happens to be veiled, it is very essential to replace it without dragging, quite simply because it can degrade other parts of the steering.

Your Suzuki Alto 2 squeaks except when you brake

It is then a contrary problem. Undeniably, when you depress the brake pedal, the brake pads stick to the wheel, the shrill noise disappears instantly. This problem is probably caused by calipers. They are much too close to the wheel when you are not braking. It is simply this touch that generates the noise. Often it will be enough to put back a few sudden brakes for the calipers to re-position themselves. In case it does not work, it is essential to replace them!

Loud noise when braking

In case your Suzuki Alto 2 produces a thud et metallic when you step on the brake pedal there's a good chance it comes from brake pads. Naturally, the wear indicator is usually supposed to work. But it also sometimes happens that it does not light up. Therefore, do not delay and go to an auto repairer. Own worn pads at this point turns out to be pretty dangerous. It seems imperative to replace them.

Conclusion

We have seen most of the situations normally. Now that we have an overview of where your problème could come, we necessarily recommend that you go to a mechanic for a more in-depth diagnosis. Go, roll!