It may not be unknown to you, but the alternator is a determining element in an engine. He is the one who is responsible for changing energy of the engine block of your Seat Fura in Electricity supply so as to recharge the battery. In the specific case where there is a concern, it can therefore mainly cause electrical failures. It therefore seems important to deal with it. However, the dysfunction can mainly come from its belt, sometimes pulleys. We will see through this post where the problems according to the noise which is issued.
Noise of the alternator belt on a Seat Fura
La alternator belt, also known as an accessory belt, is the essential component which contributes to the good action of the alternator. It is it which thanks to its convolution drives the alternator and will create electricity. However, it also serves to operate other pumps of the engine block. If it ever destroys, it can make damages frankly important in the engine of this Seat Fura.
A metallic noise on the Seat Fura:
Here is a hazard that usually comes Cold. The most common reason is that some of the streaks on this belt are damaged. However this can also happen when the pulley is a little out of gon. If the belt gets damaged, it can obviously break. If it happens that you recognize this noise, the best thing to do is to change the belt and the malfunction will be repaired almost every time.
A sharp squeal on the Seat Fura:
This is the most common concern, as well as the least critical. It often comes cold, but can reappear even when hot from time to time. However, it stops quickly. This inconvenience usually arises as soon as the accessory belt is not tight enough. It is necessary to tender and voila. Be careful, if it remains in this situation for too long, the belt may be damaged and cause more serious malfunction over time. This sharp squeak also sometimes occurs when the damper pulley happens to be deteriorated, but it is more rare.
A slight hiss or breath on the Seat Fura:
It is the opposite of the concern of the last example. Your belt is certainly too tight or too small. You can imagine what you are going to have to do!
Alternator noise on a Seat Fura
If it is indeed the alternator that produces this noise and not the belt, in this case the hassle will be really different. However, the noise you hear may have similarities compared to that of a strap, such as high hiss. The concern may come from a electrical failure, this remains relatively frequent. If ever voltage essential for the proper functioning of this Seat Fura remains deficient, it is usually seen during a lack of power of the lights or bulbs inside the car. Assuming the lack of power is obvious, it may be that the battery indicator either in operation. In order to achieve a real diagnostic of this concern, it is still possible to use a voltmeter and take the tension via the + and the least of its battery, with the ignition on obviously. Assuming that the voltage is found to be lower than that recommended by the battery, the malfunction could therefore come from the alternator. In this specific case, it will generally have to be changed.
Conclusion:
New alternator noise usually comes from the alternator belt, but can also come from the alternator itself. Economically, the alternator belt costs considerably less compared to the alternator. Get a quote from a auto repairer rather than starting repairs, because you can never be sure of the cause of the malfunction. Hoping that this post has served you something, if so we invite you to post a comment. Have a good ride with your Seat Fura.