Noises will frequently worry the driver. But they have the advantage of warning us before a bigger problem occurs. It is therefore extremely important not to take them lightly and to take steps to correct them. A abnormal rear noise sometimes happens, whether on a Toyota Rav 4 (4th Generation) or any model of vehicle. We will see what will be the most common noises on a Toyota Rav 4 (4th Generation), and what will be the concerns associated.
Rear rolling noise on the Toyota Rav 4 (4th Generation)
The bearings are particularly numerous in the mechanics of a Toyota Rav 4 (4th Generation). In the event that these are deteriorated, they generally produce a particularly singular noise. A rolling wheel triggers a low rumble , similar to the standard noise of a wheel but more intense. In this situation, the bearing of the wheels in question will have to be replaced. For rear transmission models, the transmission may also be the cause.
Clicking noise at the rear axle on the Toyota Rav 4 (4th Generation)
Most of the time, that clicking or back cracking noise on a Toyota Rav 4 (4th Generation) is due to shock absorbers . A noisy shock absorber is also a sign of wear. Beyond comfort, not to take care of it would be unreasonable. It is regularly the very state of the spring that produces this noise. You can make sure of this if the noise you hear arrives in particular on the tracks in less good condition. In this situation, they will have to be replaced. It is even recommended to have it carried out by a mechanic. If ever the shock absorbers are not damaged, the problem can come from several components. When two mechanical parts collide towards the rear of this Toyota Rav 4 (4th Generation), it can produce a popping noise quite similar. This is often due to a simple slightly unscrewed nut, however it is essential to take care of it as soon as possible.
Rear noise when braking on the Toyota Rav 4 (4th Generation)
There may be a squeaking, hissing or squeaking noise from the back of your Toyota Rav 4 (4th Generation) can be heard when you brake. Although in many cases it is not always critical, it is always essential to be concerned with it. It is always a sign of wear. Your car will lose its ability to braking if you do nothing. At a back squeak on this Toyota Rav 4 (4th Generation), it is often that the device is dirty. A simple cleaning with a brake cleaner should suffice. If you ever hear a squeak , it’s probably because your rear brakes are seized . In this situation, it will have to be replaced. If ever it's a metallic noise , so these are the platelets which are too worn. There too, they will have to be replaced. It is essential to be careful when rear noises are heard on a Toyota Rav 4 (4th Generation). We systematically recommend going to an auto repairer for a more detailed check, or to carry out work. Good road.