If it happens that you hear sounds or discern vibration as soon as you brake with this Renault Clio 2 V6 Rs, this could arise from several problems. As a general rule, there is not necessarily to worry, but it necessarily seems wiser to pay attention to it and correct this problem. Sometimes just dusting the room we're talking about could work. Through this , we will find out how to make a diagnostic taking into account the noise, and then what are the arrangements to be made.
Whistling noise on your Renault Clio 2 V6 Rs front or rear brakes
If ever a noise of whistling comes with the Renault Clio 2 V6 Rs, it's usually due to brake pads. This phenomenon is usually similar in the case where the noise comes from the rear or front brakes. In fact, the lining of the brake pads will be made of a rubber material, which will stick perfectly to the disc. When the component is damaged, the disc could touch the pad. It is therefore this friction that produces that hiss you hear. If this is the case, it is advisable to change the brake pads. However, it is also plausible that some pebbles or something else got into the pads. In this situation again, a hissing sound may be generated. It therefore seems necessary to do control by a mechanic if we want to see if it could be problematic. If ever squeak that you have to do, it is most certainly enough to take a brake cleaner and spray it into your drive of this auto.
Braking vibrations on your Renault Clio 2 V6 Rs
The vibration au braking can be discerned in several places. Around the brake pedal of course and why not on the valance or on the checkout of this famous Renault Clio 2 V6 Rs. In principle, the vibrations are due to a veiled disc. You can see it firsthand by removing the wheel to get to the disc. Be careful, in the event that it is the disk that is clouded, it is really wiser to change it quickly, simply because it will sometimes damage other elements of the system.
Your Renault Clio 2 V6 Rs squeaks except when you brake
It is therefore an inverse problem. As soon as you press, the brake pads will stick to the wheel, the shrill noise suddenly stops. This problem is probably caused by calipers. They happen to be too close to the wheel as soon as you don't step on the brake pedal. It is this touch that produces the noise. Sometimes it will be enough to apply several shots of brakes so that the calipers are replaced by themselves. If that doesn't work, you have to change them!
Loud noise when braking
Assuming that this Renault Clio 2 V6 Rs makes a thud and metallic as soon as you step on the brake pedal, there's a good chance it comes from brake pads. Normally, the wear indicator is usually supposed to light up. However, this also happens when it too is not activated. In this case, do not procrastinate and go to a professional. To have some worn pads at this point turns out to be frankly adventurous. It remains imperative to change them.
Conclusion
We have seen most of the situations a priori. Now that we have an idea of where the problème might come, we always recommend that you go to a mechanic for a better diagnosis. Be careful !