The gearbox happens to be one of the essential components of the hyundai i40. It is not uncommon for noises to appear over time, which generally come from a bad use of the clutch. However, depending on the noise, the cause of the problem turns out to be different. So let's find out what are the most common noises and how to adjust them .noise-gearbox-hyundai-i40

The box of my hyundai i40 purrs

This kind of rolling noise could arise on various occasions. Most of the time this problem disappears when using the clutch. In the event that the gearbox of the hyundai i40 hums, it is generally a slight noise , but quite unpleasant. In general it is a problem of rolling . If you are good at mechanics, there is a procedure. you will be able to attempt work and detect the faulty bearing. Otherwise, go to a mechanic. This noise can worsen over time, and you will need to change the entire gearbox.

Hyundai i40: Whistling of the gearbox

If the gearbox of your hyundai i40 emits a whistling noise, it can produce a fairly rapid failure. It is therefore essential to deal with it. This type of noise usually occurs when items begin to collide and spoil. Difficult to say if repairs are likely or if it will be necessary to change the integral gearbox. We advise you to go to your garage to carry out a more in-depth audit.

hyundai i40: The gearbox hangs and makes a cracking noise

If the gearbox hangs up as soon as you change gears, there is bound to be a problem. Indeed, it is one of the most frequent concerns. A gearbox can last a lifetime when you pay attention, but a bad daily habit can cause problems extremely quickly. The problem may have arisen from the wrong amount of oil! The procedure is simple. If ever the level is insufficient, simply reset the level. If the problem persists, your gearbox is broken. In this case, you will most certainly have to change it.

For automatic gearboxes

Since there is not too much human intervention, it is rare that the automatic transmission of a hyundai i40 is damaged alone. The causes are therefore extremely easy! The first thing to check is the oil level , then why not lubricate the device. But we advise you rather to go to a manufacturer's garage, it is safer. Do not hesitate to leave a comment if your problem is different to help our future readers.