The gearbox happens to be one of the main components of the Hyundai Xg. It happens quite often that noises occur over time, these usually come from a bad use of the clutch. However, depending on the noise, the cause of the problem may be different. So we will see what are the most common noises and how to overcome it .noise-gearbox-Hyundai-Xg

The box of my Hyundai Xg purrs

This kind of rolling noise can arise on various occasions. Most of the time this noise stops when the clutch is pressed. If your Hyundai Xg gearbox hums, it's usually a subtle noise , but relatively unpleasant. Usually this remains a problem of rolling . If you are good at mechanics, there is a technique. you can start work and detect the defective bearing. Otherwise, go instead to an auto repairer. This type of noise may get worse over time, and the complete gearbox must be changed.

Hyundai Xg: Whistling of the gearbox

If the gearbox of your Hyundai Xg ever makes a hissing sound, it can produce a relatively sudden breakdown. It is therefore important to pay attention to it. This kind of noise often appears as soon as constituents collide and wear out. Difficult to say if repairs are likely or if you will have to change the entire gearbox. We advise you to go to your mechanic in order to carry out a more detailed check.

Hyundai Xg: The gearbox hangs and makes a cracking noise

If your gearbox hangs up when you shift gears, there is bound to be a problem. In practice, this remains one of the most frequent dysfunctions. A gearbox can never have a problem if you really take care of it, but improper daily use can create malfunctions very quickly. The problem is certainly due to a lack of oil! The technique is simple. If the level is low, it will suffice to reset the level. If the problem does not go away, your gearbox is damaged. You will therefore certainly be obliged to change it.

For automatic gearboxes

Since there is no human interaction, it is rare that the automatic transmission of the Hyundai Xg is damaged on its own. The causes turn out to be super easy! The first thing to check is your oil level , then maybe lubricate the device. However it is advisable rather to go to a manufacturer's garage, it is safer. We invite you to write a comment to provide more precision and help our future readers.