The gearbox is one of the main components of the Iveco Eurocargo. Quite often it happens that noises occur over time, which are often linked to bad use of the clutch system. But depending on the noise, the origin of the malfunction may be different. We will see what are the most usual noises and how to fix it .
My Iveco Eurocargo's box is purring
This kind of rolling noise can arise on various occasions. Generally the noise stops when the clutch is pressed. If your Iveco Eurocargo gearbox hums, it's usually a slight noise , however relatively unpleasant. In most cases this remains a malfunction of rolling . In case you are good at mechanics, there is a methodology. you will be able to start repairs and detect the bearing that presents a problem. Otherwise, go to an auto repairer. This type of noise may get worse as time goes by, and the entire gearbox will need to be replaced.
Iveco Eurocargo: Whistling of the gearbox
When the gearbox of this Iveco Eurocargo produces a sort of hissing sound, it can generate a relatively rapid failure. It is therefore wiser to pay attention to it. This type of noise usually comes when items begin to collide and spoil. Difficult to say if repairs are possible or if you will have to replace the entire gearbox. We advise you to go to your garage to carry out a more specific check.
Iveco Eurocargo: The gearbox hangs and makes a cracking noise
When your gearbox hangs when you try to shift, there is bound to be a malfunction. Indeed, this remains one of the most regular concerns. A gearbox can last a lifetime if you are careful, however a bad everyday habit will create worries very simply. The malfunction is certainly due to a lack of oil! The methodology is easy. When the level is insufficient, you just need to repeat the level. If the malfunction does not go away, your gearbox is damaged. You will therefore most likely have to replace it.
For automatic gearboxes
Since there is not too much human intervention, it is very rare that the automatic gearbox of an Iveco Eurocargo is damaged alone. The reasons turn out to be very simple! The first point to consider is the oil level , and ultimately lubricate the mechanism. However we advise you rather to go to a manufacturer's garage, it is safer. You can post a comment to provide more precision and help other Internet users.