The gearbox is one of the fundamental elements of the Toyota Endo. It is not uncommon for noises to arise over time, these are often linked to a bad use of the clutch. But depending on the noise, the cause of the malfunction turns out to be different. We are going to find out what will be the most frequent noises and how to fix it .noise-gearbox-Toyota-Endo

The box of my Toyota Endo purrs

This type of rolling noise can arise in different situations. Usually this noise stops when the clutch pedal is depressed. In the event that your Toyota Endo gearbox hums, it is usually a subtle noise , however rather annoying. Usually this remains a malfunction of rolling . If you are good at mechanics, there is a procedure. you can start repairs and try to find the bearing that is having a problem. If not, go to a mechanic. This sort of noise can get worse over time, and you will need to change the entire gearbox.

Toyota Endo: whistling of the gearbox

If the gearbox of your Toyota Endo whistles, it can cause a rather sudden failure. So don't wait too long to take care of it. This type of noise usually occurs when constituents start to collide and wear out. It is not obvious to know if work is conceivable or if it will be necessary to change the complete gearbox. We advise you to go to your garage for a more detailed audit.

Toyota Endo: The gearbox hangs and makes a cracking noise

If your gearbox ever hangs when you try to shift, there is certainly a problem. In reality, this remains one of the most recurring dysfunctions. A gearbox can never have a problem when you are careful, however a little brutal use on a daily basis will simply generate malfunctions. The malfunction is probably due to the wrong amount of oil! The procedure is simple. If ever the level is insufficient, you just have to redo the level. If the malfunction remains, your gearbox is damaged. You will most likely be forced to change it.

For automatic gearboxes

Since there is not too much human interaction, it is very rare for the Toyota Endo's automatic gearbox to be damaged on its own. The reasons are therefore super simple! The first thing to consider is the oil level , and possibly lubricate the device. However, we recommend that you go to a manufacturer's garage, it is safer. We invite you to write a comment to provide more precision to help our future readers.