A malfunction of central locking is rather annoying. At times it can also be risky, simply because you can get stuck in your car. Depending on the car models, the centralized locks are activated automatically when closing the doors, for others it must be activated manually. We will now see what will be the most frequent malfunctions and what to do to resolve them.
The central locking of your Seat Ginebra no longer works
Different symptoms can help you find the fault. Especially compared to the number of doors that have this problem. Let's study this in more depth.
Seat Ginebra: central locking does not work on one of the doors
To start, try to lock your door by hand. If it never shows any complications, it means that the mechanism is in good working order. So your problem came from somewhere else upstream. In principle, this is a problem originating from a short circuit. To check it is super convenient! You will need to open the door of your Seat Ginebra by removing the trim. Follow the electrical wires that leave the closing mechanism. So examine the wiring but also the condition of the cable. It will thus be necessary to rectify the problem in question. In the case where on the other hand the closure is hard by hand and with the buttons, this means that it is the mechanism which has a problem. Don't worry, you just need to oil it or change it if it is completely worn out.
Seat Ginebra: central locking does not work at all
This is a super annoying problem. The central locking of your Seat Ginebra does not work anymore. The cause of the problem is not easy to detect. So we will see the most common malfunctions.
Replace fuses on your Seat Ginebra
The problem may be caused by a fuse wire rack. It is very easy to recognize visually. In this situation you can perfectly imagine what to do, you just have to replace it. It is a rather rare problem but nevertheless it can happen.
General feeding problem
In the event that your vehicle has a general power problem, it is exceptional that only the closure no longer works. So don't worry, it's probably not that problem you won't be on this article if it was. However, it is sometimes possible that there is a contact problem from the power supply to the central locking mechanism. We will have to deoxidize the connection or replace the wire. It is easy to repair , the most complex is to discern the false contact.
Seat Ginebra: Change the battery in your key
Only your key may no longer work! We can sometimes forget this phenomenon, however it is your key that controls the locking system. In this situation it is enough tailored , simply disassemble the key, using a flat screwdriver for example, and replace the battery in the key. You can post a comment if your problem does not appear in this file, to help other Internet users! Good walk.