A concern with central locking is relatively annoying. At times it can even be risky, simply because you can get stuck inside. Depending on the range of cars, the central locking systems are activated automatically when closing the doors, for others it is necessary to do it alone. So we will see here what are the most common malfunctions and what are the solutions to solve them.
Central locking of your Smart Crossblade no longer works
Several symptoms can help you find the fault. Among other things compared to the number of doors that have this concern. Let's take a closer look.
Smart Crossblade: central locking does not work on one of the doors
To start, try to lock the door by hand. When it shows no complications, it means that the system is operational. Your concern actually comes from somewhere else upstream. Generally it is a concern resulting from a break in the electrical circuit. To check it is super convenient! The interior of the door of your Smart Crossblade by removing the covers. Reassemble the electric wires which leave from the closing device. In fact check the wiring but also the condition of the cable. It will therefore be necessary to resolve the concern that you have found. If on the other hand closing is impossible by hand and electrically, this means that it is the system which has a problem. Don't worry, just grease it or replace it if it is completely damaged.
Smart Crossblade: central locking no longer works at all
It is a concern that remains super unpleasant. Central locking of your Smart Crossblade no longer works at all. The cause of the concern is not easy to locate. We will actually see the most common malfunctions.
Changing fuses on your Smart Crossblade
The concern may arise from a fuse wire rack. It's pretty easy to see firsthand. In this case you know very well what to do, just change it. It's a relatively rare concern but it could happen.
General feeding problem
If your car has a general food concern, it is exceptional that just the closure no longer works. So don't worry, it's probably not your concern you won't be on this article if it was. However, it is sometimes possible that there is a concern with contact from the supply to the central locking device. We will have to clean the connection or replace the wiring. It is easy to repair , should we still discern the short circuit.
Smart Crossblade: Change your key battery
The key may only stop working! We can regularly omit this phenomenon, however it is the key that controls the closure system. In this case, it's even more tailored , just open the key with a screwdriver and change the battery inside. We invite you to post a comment in case your concern is not included in this guide, in order to help our readers! Be careful.