A central locking problem is rather annoying. Sometimes it can also be dangerous, simply because we can be stuck in it. Depending on the range of cars, the centralized locks engage automatically when you close the doors, for others you will have to do it alone. We will see with this article what will be the most regular problems and how to go about solving them.problem-closing-centralized-Smart-Crosstown

Central locking of your Smart Crosstown no longer works

Certain clues may assist you in detecting the failure. Among other things depending on the number of doors that have this problem. So let's take a closer look.

Smart Crosstown: central locking no longer works on one of the doors

First try to lock your door manually. If this does not show any complications, it means that the device is operational. Your problem actually comes from elsewhere upstream. In general it is a problem originating from a short circuit. In order to verify it is very easy! You will need to disassemble the interior of the door from your Smart Crosstown by removing the covers. Reassemble the electric cables which leave from the closing system. Inspect the electrical connections but also the good condition of the cable. It is thus necessary to repair the problem that you have found. If, despite everything, closing is impossible manually and with the buttons, this means that it is the device which has a problem. Do not worry, just lubricate it or replace it with a new one if it is really damaged.

Smart Crosstown: central locking no longer works at all

This is a problem which can become very unpleasant. Central locking of your Smart Crosstown no longer works at all. The root of the problem is not easy to find. We will actually see the most common problems.

Changing fuses on your Smart Crosstown

The problem may come from a fuse wire rack. This remains fairly convenient to discern visually. In this case you can perfectly imagine what to do, just replace it. This remains a rather rare problem but it can happen.

General feeding problem

If your vehicle ever has a general power problem, it is exceptional that just the closure does not work. So rest assured, it's probably not that problem and you wouldn't be on this page right now. However, it is sometimes possible that there is a problem with the electrical connection from the power supply to the central locking system. The connection must be deoxidized or the wiring replaced. It stays simple to repair , the most complex is to find the short circuit.

Smart Crosstown: Change your key battery

It's just possible that your key no longer works! We can sometimes forget about this problem, but it is your key that controls the locking system. In this case, it's even more commode , just remove this key, with a screwdriver, and replace the battery in it. You can write a comment if your problem is not in this article, to help our readers! Good walk.