A central locking problem is relatively annoying. It can also be risky on a regular basis, because you can get stuck in it. Depending on the range of cars, the central locks are activated automatically when you close the doors, for others you will have to operate it manually. We are now going to see what will be the most regular problems and what are the solutions to repair them.Volkswagen-411-central-closure-problem

The central locking of your Volkswagen 411 no longer works

Several clues can help you to detect the failure. Among other things in relation to the number of doors that have this malfunction. Let's take a closer look.

Volkswagen 411: central locking does not work on one of the doors

To start, try to lock your door manually. When this does not present a problem, the device is operational. Your dysfunction is in fact coming from another place somewhere upstream. Usually it is a malfunction resulting from a break in the electrical circuit. So to check it is super simple! You will need to open the door of this Volkswagen 411 by removing the trim. Reassemble the cables which leave the closing device. Check the electrical connections as well as the condition of the wiring. The dysfunction in question must therefore be rectified. In the event that despite everything closing is difficult manually and electrically, it is because the device has a malfunction. Do not panic, you will just have to oil it or replace it if it is completely worn out.

Volkswagen 411: central locking does not work at all

This is a dysfunction which is super annoying. The central locking of this Volkswagen 411 no longer works at all. The source of the dysfunction is not obvious to detect. We will see in fact the most common concerns.

Changing the fuses on your Volkswagen 411

The malfunction can come from a fuse wire rack. It remains rather easy to perceive visually. In this case you can totally imagine the procedure, you just have to change it. This is still a relatively rare malfunction however it could happen.

General feeding problem

In the event that your vehicle has a general power supply malfunction, it is very rare that only the closure does not work. So don't worry, it probably isn't your problem and you wouldn't be on this page right now. However, it sometimes happens that a contact malfunction is found at the start of the power supply to the central locking device. You have to deoxidize the connection or change the wire. It stays easy to repair , the most complex is to find the false contact.

Volkswagen 411: Change the battery in your key

Your key may only have run out of battery! This problem can be omitted from time to time, nevertheless it is your key which controls the locking system. In this case it is all the more tailored , all you have to do is open the key, with a flat screwdriver for example, and change the battery inside. Do not hesitate to write a comment if your problem is not found in this guide, in order to help other Volkswagen 411 owners! Good road.