When the clock runs out of light, it can be unpleasant. So you have to change the display bulb of this Nissan Invitation. Even if the dashboard remains operational, we are missing several indications to drive in sufficient comfort. This action is not complex to perform, but requires a minimum of rigor. We also advise you to take photos at different stages to remind you of the reverse manipulation, especially regarding connectors. To execute this operation, count approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, step by step.change-bulb-clock-Nissan-Invitation

How to change the bulb on the Nissan Invitation display

Depending on the year of release, the methodology may vary a little. It is conceivable that some covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them preciously aside.
  • Once the facade is completely removed, you need disconnect connectors connected to the clock bulb of your Nissan Invitation. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally have access to the defective bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also naturally.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered particular malfunctions.