When the clock stops working, it can get unpleasant. So you have to replace the display bulb of the Nissan Maxima. Although the dashboard remains operational, we lack several information to drive comfortably. This action is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remind you of the reverse process, especially regarding connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's take a look at how to replace this bulb, point by point.
How to change the bulb on the Nissan Maxima display
Depending on the years of circulation, the method may vary slightly. It remains possible that several covers or screws are not identical. We therefore propose the logic to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them preciously aside.
- Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of this Nissan Maxima. You will be able to disassemble all the connectors of the block, provided you remember the location. Help yourself with your camera if it helps you.
- You can normally have access to the damaged bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also naturally.
- Place the new bulb making sure it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered particular problems.