When the clock runs out of light, it can get annoying. So you have to replace the display bulb of the Seat Malaga. Even if the dashboard is still operational, we are missing some indications to move comfortably. This manipulation is not difficult to execute, but requires a minimum of rigor. We also advise you to take photos at certain stages to remind you of the reverse process, especially regarding connectors. To carry out this manipulation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Seat-Malaga

How to change the bulb on the Seat Malaga display

Depending on the years of circulation, the method may vary slightly. It is conceivable that some covers or screws differ. Here is therefore the logic to be followed in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
  • Once the facade has been completely removed, it will disconnect connectors which connect to the clock bulb of the Seat Malaga. You can therefore remove all the connectors from the block, provided that you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally have access to the defective bulb. Gently dismantle the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The voltage also of course.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

You can leave us a comment if you have encountered specific malfunctions.