When the clock stops working, it can get unpleasant. It will therefore have to change the display bulb of this seat toledo. Although the dashboard remains operational, some information is missing in order to drive in sufficient comfort. This action is not complex to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To perform this task, plan approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's take a look at how to replace this bulb step by step.
How to change the bulb in the seat toledo display
Depending on the years of production, the method may vary slightly. It is conceivable that several covers or screws are not identical. Here is therefore the logic to be followed in general.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them preciously aside.
- Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of this seat toledo. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension also naturally.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave a comment if you have encountered particular concerns.