When the clock stops lighting up, it can be annoying. So you have to change the display bulb of this Seat Tribu. Although the dashboard remains functional, it lacks several indications to circulate comfortably. This operation is not complex to perform, but requires a minimum of thoroughness. We also advise you to take photos at certain stages to remind you of the reverse process, especially regarding connectors. To complete this task, count about a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's take a look at how to replace this bulb, point by point.change-bulb-clock-Seat-Tribe

How to change the bulb of the Seat Tribu display

Depending on the years of production, the procedure may vary slightly. It is likely that some covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them preciously aside.
  • Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of your Seat Tribu. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also obviously.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered particular concerns.