When the clock stops working, it can get annoying. So we will have to change the display bulb of this Opel Monza. Although the dashboard is still operational, we are missing several pieces of information in order to drive in sufficient comfort. This operation is not hard to execute, but requires a minimum of thoroughness. We also advise you to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.change-bulb-clock-Opel-Monza

How to change the bulb on the display of the Opel Monza

Depending on the years of production, the procedure may vary a little. It is conceivable that several covers or screws differ. Here is the procedure to follow in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Opel Monza. You can thus dismantle all of the block's connectors, provided that you remember the location. Help yourself with your camera if it helps.
  • You can normally access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage as well obviously.
  • Place the new bulb making sure it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

Do not hesitate to leave us a comment if you have encountered specific malfunctions.