Now we can find turbos on many automobiles of the past 20 years, whether in engines essences ou Diesel. Before you start DIY, it is of course necessary to be convinced that the problem comes from the turbo of this jeep grand cherokee. But if you are reading this article, you most likely know the reason.change-turbo-jeep-grand-cherokee

How to change the turbo of your jeep grand cherokee

Compared to the turbo to be presented, methods will be able to change a bit. When you get a turbo it will usually come with assembly instructions. The best thing to do is while you read it. However, in the event that you have not yet made the purchase, you will find below the steps to follow in order to change a turbo for a jeep grand cherokee. This way you will know if you have the required skills. Just before you start, make sure you have all of the tools required. You will need your bucket for engine oil, a set of ratchet wrenches, your flat pliers, allen and flat wrenches. Generally, turbochargers will be supplied with a tool kit which includes a few jointsFew studs as well as a dose oil. However, we suggest that you have a mechanic check it, because tinkering with a pit is easier to do this work. And of course, the turbo happens to be a pretty fragile constituent for a jeep grand cherokee. Taking into account that the technique is not particularly complex, it is still advisable to go to a specialist.

  • Change the engine oil and change this oil filter. Replace a little oil, without putting too much. This is an inevitable step!
  • Remove all the plugs that there are on the turbo of this jeep grand cherokee.
  • Check that there are no foreign bodies in the casings, since this is a source of malfunction.
  • Remove the conduits as well as all the screws and the nuts which support this turbo.
  • Put the turbo in place in this jeep grand cherokee.
  • Set up the famous turbo, checking that the seals match exactly
  • Install the oil return pipe
  • Reassemble all the required screws and nuts
  • Fill the turbo using the oil supplied with the turbo
  • Start the turbine by hand in order to operate the turbo.
  • Reconnect all the components to the turbo of the grand cherokee jeep.
  • Once all the parts are found to be installed, you will start the engine and run it for 5 to 10 minutes.

Now that the turbo is in place but also that the car has been running for ten minutes, it is necessary to take a ride with this jeep grand cherokee so as to see that everything is working properly. It is also advisable to check the oil level but also the water level quite frequently in the coming days. Write a comment in case our tutorial has served you. Enjoy the road!