Now there are turbos in most cars in circulation, whether for systems essences ou Diesel. Just before you start DIY it is of course necessary to be sure that the problem comes from the turbo of this Nissan Kubistar. But if you read this article, it shows that you probably know the source.change-turbo-Nissan-Kubistar

How to change the turbo of your Nissan Kubistar

Depending on the turbo to be presented, some of the processes will be able to change a bit. As soon as you buy a turbocharger, it will usually be supplied with an assembly manual. The ideal is therefore that you follow it to the letter. That said, if you have not yet purchased the product, we suggest the steps to follow in order to replace a turbo compressor on the Nissan Kubistar. In this way you will know what capacities are necessary. Before you start, make sure you have all of the tools required. You will have the utility of your container for engine oil, a set of ratchet wrenches, flat pliers, your allen and flat wrenches. Most of the time, these turbochargers will be delivered with a mounting kit which includes joints, studs and a dose oil. We still advise you to have a check by a pro that working from a pit is much more convenient to do this kind of process. And of course, the turbocharger remains a very sensitive element on a Nissan Kubistar. Even if the technique is not really complex, it is still advisable to go to a specialist.

  • Drain the engine block and replace this oil filter. Replace a little oil, without putting too much. This is a mandatory manipulation!
  • Remove all the plugs present on the turbocharger of the Nissan Kubistar.
  • Check that there are no residues in the casings, as this is a source of concern.
  • Remove the ducts with all the screws and then the nuts which allow this turbocharger to be held.
  • Remove the existing turbocharger from the Nissan Kubistar.
  • Reassemble the new turbocharger, checking that the locations are exactly suitable
  • Replace the oil return pipe
  • Mount each of the screws and nuts you removed
  • Fill the turbocharger with oil from your syringe
  • Rotate the turbine by hand to operate the turbocharger.
  • Reconnect all elements to the turbocharger of the Nissan Kubistar.
  • Now that when each of the parts are assembled, you can start the engine block and run it for ten minutes.

Once everything is installed and screwed and the car has been running for ten minutes, do not hesitate to drive with the Nissan Kubistar so as to check that the assembly works well. It is also advisable to check the quantity of oil and water fairly often for 15 days. Write a comment in case our file has been useful. Good walk !