Today we find turbos in most cars of the last 20 years, whether in engines essences ou Diesel. Before starting the DIY, of course, you have to be sure that the problem is with the turbo in your Nissan Leaf 2. However, seeing that you are reading this article, it reveals that you most likely know the reason.
How to change the turbo of your Nissan Leaf 2
Depending on the turbo to position, some of the procedures may fluctuate a bit. When you purchase a turbo it will always be supplied with an assembly note. It is best if you read it then. However, if you still have not purchased the product, here are the main points to change a turbo for your Nissan Leaf 2. This way you will know if you have the skills. Just before starting, you must have all the tools required. You will need a container for the engine oil, a set of ratchets, flat pliers, allen and open end wrenches. Generally, turbochargers turn out to be delivered with their set of utensils which contain a few jointsFew studs as well as a little oil. We still suggest that you have a mechanic checked because working from a pit is much easier for these processes. In addition, the turbo is a really fragile component in the Nissan Leaf 2. You should know that handling is not particularly laborious, we nevertheless advise you to go to a specialist.
- Change the engine oil and change the oil filter. Put a bit of oil, but very little. This is an imperative step!
- Remove all the caps that are on the turbo of the Nissan Leaf 2.
- Watch that there are no residues within the housings, since this is undoubtedly a cause of malfunction.
- Remove the ducts and all the screws but also the nuts which hold the turbo.
- Remove the faulty turbo from your Nissan Leaf 2.
- Refit the new turbo, checking that the seals stick exactly
- Refit the oil return pipe
- Reinstall all required screws and nuts
- Fill the turbo with oil from your syringe
- Rotate the turbine with your hands to rotate the turbo.
- Assemble all the components to the turbo of the Nissan Leaf 2.
- Once all the parts are in place, you can start the engine and let it run for about ten minutes.
Now that everything is in order and the engine has been running for a few minutes, do not hesitate to get behind the wheel of your Nissan Leaf 2 so that the assembly is working properly. We also advise you to check the quantity of oil and water regularly in the following weeks. Write a comment if this tutorial was useful to you. Enjoy again!