Nowadays we find these turbos on a lot of cars in circulation, whether for engines essences ou Diesel. Before starting the work you will naturally have to be convinced that the hassle comes from the turbo of this Nissan Maxima 3. However if you are reading to us, this reveals that you probably know the source.change-turbo-Nissan-Maxima-3

How to change the turbo of your Nissan Maxima 3

Compared to the turbo to be installed, some of the manipulations can fluctuate a bit. When you get a turbocharger, the product will usually come with an assembly note. It is therefore best to follow it point by point. However if you have not made the purchase, you will find below the steps to follow to be able to replace a turbo compressor for the Nissan Maxima 3. So you will know if you have the skills. Just before you start, make sure you have all of the tools indispensable. You are going to need a container for engine oil, a bunch of ratchet wrenches, your pliers, allen wrenches as well as wrenches. Often these turbos are delivered with a mounting kit including joints, studs and a syringe oil. It is still advisable to go to a pro because working with a pit turns out to be much more convenient for carrying out the work. In addition, the turbocharger turns out to be a very delicate component for this Nissan Maxima 3. You should know that the technique is not very complicated, it is nevertheless advised to go to a professional.

  • Drain the engine and replace the oil filter. Add a small amount of oil. This is a necessary procedure!
  • Remove all the plugs from the turbocharger of your Nissan Maxima 3.
  • Check that there are no residues on the casings, since this is sometimes a source of malfunction.
  • Remove the ducts and each of the screws and nuts which hold the turbocharger.
  • Remove the existing turbocharger from this Nissan Maxima 3.
  • Install the new turbocharger, checking that the seals are completely suitable
  • Refit the oil return pipe
  • Install all required screws and nuts
  • Fill the turbocharger using the oil supplied with the turbo
  • Rotate the turbine manually to activate the turbocharger.
  • Connect all the components to the turbocharger of your Nissan Maxima 3.
  • Now that when all the parts are in place, you will be able to start the engine and run it for 5 to 10 minutes.

Now that the assembly is installed but also that the engine has been running for a few minutes, you must drive in this Nissan Maxima 3 in order to examine that the assembly is turning properly. It is also advisable to watch the oil and water level quite often for 15 days. Leave a comment in case this file was useful to you. Good walk !