Now we can find turbos in most vehicles of the past 20 years, whether it's the engines essences ou Diesel. Before launching into these manipulations you will obviously have to be certain that the problem comes from the turbo of the famous Seat Arosa. But since you're reading from us, you probably know the cause.change-turbo-Seat-Arosa

How to change the turbo of your Seat Arosa

Compared to the turbo to be installed, some of the processes may fluctuate slightly. When you buy a turbo it will be systematically sold with a note of achievement. The best thing to do is so that you read it. But in the event that you have still not bought the product, here are the main axes below to replace a turbo for your Seat Arosa. In this way you will know if you have the skills. Just before you start, make sure you have all of the tools required. You will need an oil receptacle, a bunch of ratchet wrenches, flat pliers, allen and flat wrenches. Generally, turbos will be supplied with their mounting kit including some jointsFew studs as well as a little oil. However, we suggest that you have your garage checked by a mechanic since working with a pit is easier to do this work. In addition, the turbo remains a fairly sensitive constituent in a Seat Arosa. Even if the operation is not very complex, we still advise you to go to a specialist.

  • Drain the engine and replace this oil filter. Add a little oil, in small quantities. It is a necessary phase!
  • Remove all the plugs found around the turbo of the Seat Arosa.
  • Check that there are no residues on the casings, since this is sometimes a source of problem.
  • Remove the conduits but also all the screws and then the nuts which will allow this turbo to hold.
  • Remove the faulty turbo from your Seat Arosa.
  • Set up the new turbo, checking that the locations match perfectly
  • Replace the oil return pipe
  • Replace the required screws and nuts
  • Fill the turbo with oil from your syringe
  • Operate the turbine manually to operate the turbo.
  • Refit all of the elements to the turbo of the Seat Arosa.
  • Once the parts happen to be in place, you can turn on the engine and let it run for ten minutes.

Now that the turbo is in place but also that the engine has been running for 5 to 10 minutes, you can drive with your Seat Arosa so that you can see that everything is working well. You are also advised to watch the amount of oil and water quite often for 15 days. Write a comment if this text was helpful. Good road !