Today we find the turbos in a large part of the cars in circulation, be it the systems essences ou Diesel. Before starting these manipulations it will obviously be necessary to be certain that the concern comes from the turbo of your Seat Ateca. However, since you are reading from us, this means that you probably know the reason.change-turbo-Seat-Ateca

How to change the turbo of your Seat Ateca

Depending on the turbo to be positioned, some of the procedures may vary a bit. When you buy a turbocharger, the product will usually come with an assembly note. The best thing to do is therefore to follow it to the letter. However if you have not yet made the purchase, here are the main lines to change a turbo compressor for this Seat Ateca. This way you will find out if you have the skills. Just before you start, make sure you have all of the tools required. You will need an oil container, a set of ratchets, your pliers, allen and flat wrenches. Typically, these turbos are sold with a tool kit that includes joints, studs but also a portion oil. We still recommend that you go to a professional since tinkering with a pit is much easier to do this kind of work. And of course, the turbocharger turns out to be a particularly delicate element in this Seat Ateca. Taking into account that the operation is not very complicated, we still advise you to go to a mechanic.

  • Change the engine oil and change this oil filter. Replace a bit of oil, but very little. This is an imperative phase!
  • Remove all the plugs found around the turbocharger of your Seat Ateca.
  • Check that there are no foreign bodies in the housings, since this is undoubtedly a cause of problem.
  • Remove the conduits and all the screws and nuts which will hold this turbocharger.
  • Remove the existing turbocharger from your Seat Ateca.
  • Reassemble the famous turbocharger, checking that the joints stick precisely
  • Refit the oil return pipe
  • Fit all the screws and nuts you removed
  • Fill the turbocharger using oil from your syringe
  • Operate the turbine with your hands to turn the turbocharger.
  • Connect all the elements to the turbocharger of your Seat Ateca.
  • Once all the parts turn out to be installed, you can start the engine and run it for a few minutes.

Once everything is set and screwed but also that the car has been running for a while, you will be able to walk around in your Seat Ateca to see that everything is working properly. At the same time, we advise you to check the oil level and also the water level regularly in the weeks that follow. Write a comment in case this text was useful to you. See you soon !