Nowadays you can find turbos on a lot of cars in circulation, as much on the systems essences ou Diesel. Before starting work, it must of course be certain that the problem comes from the turbo of the famous Seat Ibe. Nevertheless if you are reading this article, it means that you most likely know the cause.
How to change the turbo on your Seat Ibe
Depending on the turbo to be presented, some of the processes will be able to change very slightly. As soon as you get a turbocharger, it is systematically sold with assembly instructions. The best is therefore that you read it. But in the event that you have not made the purchase, we offer the main axes to change a turbo on the Seat Ibe. Then you will know if you have the skills. Before starting, take care to have all of the tools indispensable. You will use your oil receptacle, a set of ratchet wrenches, your pliers, allen wrenches as well as flat wrenches. Usually, these turbos turn out to be supplied with their tool kit including some jointsFew studs as well as a dose oil. However, we advise you to have it checked by a specialist because tinkering with a pit turns out to be even simpler for these processes. In addition, the turbocharger remains an extremely delicate component for a Seat Ibe. You should know that the operation is not very complex, it is still advisable to go to a technician.
- Drain the engine block and change the oil filter. Add a little oil, but not too much. This is an inevitable manipulation!
- Remove the different plugs found around the turbocharger of your Seat Ibe.
- Check that there are no foreign bodies inside the casings, since this is undoubtedly a source of concern.
- Remove the ducts but also all of the screws and nuts that will hold the turbocharger.
- Remove the faulty turbocharger from this Seat Ibe.
- Install the all-new turbocharger, checking that the locations match exactly
- Replace the oil return pipe
- Replace all the screws and nuts that you removed
- Fill the turbocharger with oil from your syringe
- Operate the turbine manually to activate the turbocharger.
- Reattach the various connections to the Seat Ibe turbocharger.
- Now that when all the components have been assembled, you can turn on the engine block and let it run for ten minutes.
Now that everything is in place and the car has been running for 5 to 10 minutes, it is necessary to take a ride with this Seat Ibe in order to see that everything is turning properly. At the same time, we recommend that you check the oil and water level regularly for 15 days. Leave a comment if this text was helpful. Good walk !