Now there are turbos in a large part of the vehicles in circulation, as much on engines essences ou Diesel. Before starting these manipulations it is of course necessary to be persuaded that the problem comes from the turbo of the famous seat inca. But since you are on this page, you probably know the source.change-turbo-seat-inca

How to change the turbo of your seat inca

Depending on the turbo to be installed, some of the processes may vary a little. As soon as you get a turbo it will usually be delivered with a note of achievement. The best thing to do is while you read it. However, in the event that you have not yet made the purchase, discover the main routes so as to replace a turbo compressor for the seat inca. In fact you will know if you have the skills. Just before you start, make sure you have all of the tools indispensable. You will need an oil container, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat wrenches. Generally, these turbos will be delivered with a lot of utensils including some jointsFew studs but also a dose oil. We still advise you to have it checked by a professional since working with a pit turns out to be even easier for this kind of process. In addition, the turbo is a super fragile element for the seat inca. Even if the technique is not really difficult, it is nevertheless advisable to go to a technician.

  • Change the engine block oil then replace the oil filter. Add a little oil, but very little. It is an inevitable procedure!
  • Remove all the plugs present at the turbo of this seat inca.
  • Check that there are no residues inside the casings, since this is sometimes a source of concern.
  • Remove the conduits and all the screws and then the nuts which support the turbo.
  • Remove the existing turbo from your seat inca.
  • Fit the brand new turbo, checking that the seals stick completely
  • Install the oil return pipe
  • Replace the necessary screws and nuts
  • Fill the turbo with oil from your syringe
  • Rotate the turbine with your hands to activate the turbo.
  • Connect all the elements to the seat inca turbo.
  • Now that when the components turn out to be in place, you will start the engine block and let it run for a few minutes.

Now that everything is in order and the car has been running for 5 to 10 minutes, you can take a ride with your seat inca so that you can check that everything is working properly. We also advise you to check the oil level but also the water level quite frequently in the days to come. Write a comment in case our file has helped you. Enjoy again!