Now we find these turbos in most new cars, as many on engines essences ou Diesel. Just before you start this task it is of course necessary to be sure that the malfunction comes from the turbo of your seat leon. However, since you are on this page, it means that you probably know the cause.
How to change the turbo of your seat leon
Compared to the turbo, the handling may change slightly. When you get a turbo it will usually be delivered with a note of achievement. The ideal is therefore to follow it point by point. However if you have not yet made the purchase, here are the manipulations to be able to replace a turbo compressor for a seat leon. Thereafter you will know what abilities are needed. Before you start, make sure you have all of the tools required. You will need an oil receptacle, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Most of the time, these turbos will be sold with a lot of utensils including some jointsFew studs but also a dose oil. We still advise you to have a check done by a mechanic since tinkering with a pit remains much easier to carry out these procedures. In addition, the turbo remains a particularly sensitive component in a seat leon. Even if the operation is not extremely complex, it is still advisable to go to a technician.
- Change the engine oil and replace the oil filter. Add a little oil, but very little. This is an essential procedure!
- Remove all the plugs from the turbo of your seat leon.
- Check that there are no undesirable elements inside the casings, since this can be a source of malfunction.
- Remove the ducts with all the screws and then the nuts which will support the turbo.
- Remove the existing turbo from this seat leon.
- Refit the all-new turbo, checking that the joints match exactly
- Refit the oil return pipe
- Mount all the screws and nuts that you removed
- Fill the turbo with the oil provided
- Rotate the turbine manually to rotate the turbo.
- Reattach all the components to the turbo of your seat leon.
- Now that when all the components are found to be installed, you can start the engine and run it for 5-10 minutes.
Now that everything is in order but also that the car has been running for a few minutes, you can drive in this seat leon to see that the whole thing works well. It is also advisable to look at the amount of oil and water quite frequently in the days to come. Post a comment in case this tutorial has been useful. Enjoy the road!