Today we can find the turbos on a lot of new cars, as many on systems essences ou Diesel. Just before starting DIY you will obviously have to be sure that the problem arises from the turbo of the famous Seat Malaga. But since you're reading this article, it shows that you probably know the reason.
How to change the turbo on your Seat Malaga
Depending on the turbo to be presented, processes may change slightly. When you get a turbocharger it will always be sold with a performance note. It is best that you read it. On the other hand in the event that you have not yet bought the product, you will find below the manipulations to be made to be able to change a turbo compressor for the Seat Malaga. In fact you will know if you are capable of it or not. Before starting, make sure you have all of the tools required. You are going to need an oil container, a set of ratchet wrenches, your flat pliers, allen wrenches as well as flat wrenches. Often these turbochargers come with a tool kit that includes a few jointsFew studs as well as a syringe oil. We still advise you to go to a specialist since tinkering with a pit remains much simpler for these processes. What is more, the turbocharger is a really delicate element on the Seat Malaga. Even if the technique is not really laborious, we advise you to go to a specialist.
- Change the engine and change your oil filter. Replace a bit of oil, but very little. This is an imperative procedure!
- Remove all the plugs there are on the turbocharger of this Seat Malaga.
- Check that no undesirable elements are found in the casings, since this is undoubtedly a cause of problem.
- Remove the ducts and all of the screws and then the nuts that hold your turbocharger.
- Remove the turbocharger in place in this Seat Malaga.
- Reassemble the famous turbocharger, checking that the locations completely agree
- Fit the oil return pipe
- Install the required screws and nuts
- Fill the turbocharger using the oil supplied with the turbo
- Start the turbine manually so that the turbocharger turns.
- Assemble all the connections to the Seat Malaga turbocharger.
- Once the components are mounted, you must start the engine and let it run for ten minutes.
Now that everything is in place and of course that the car has been running for ten minutes, it is possible to drive the steering wheel of this Seat Malaga in order to see that the assembly turns correctly. It is also advisable to check the quantity of oil but also water fairly frequently for 15 days. Post a comment in case this tutorial helped you. See you soon !