Now we find the turbos in much of the cars of the last 20 years, as much on systems essences ou Diesel. Before starting work, you must obviously be sure that the problem comes from the turbo of the famous seat marbella. But since you've come this far, it shows that you probably know the cause.change-turbo-seat-marbella

How to change the turbo of your seat marbella

Compared to the turbo, the processes can fluctuate a bit. When you buy a turbo it is systematically delivered with an assembly manual. The best thing to do then is to follow it step by step. However if you have not yet purchased the product, here are the main lines to replace a turbo compressor for a seat marbella. In this way you will know if you have the skills. Just before you start, make sure you have all of the tools required. You will use your bucket for oil, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Usually, the turbos will be delivered with their mounting kit including some jointsFew studs and a syringe oil. We still suggest that you have a specialist check it out because working with a pit is much more practical for these procedures. What is more, the turbo remains a rather fragile component for the seat marbella. Even if the technique is not extremely laborious, we still advise you to go to a garage.

  • Drain the engine block then replace the oil filter. Put a little oil, without putting too much. It is an essential step!
  • Remove all the plugs found on the turbo of your seat marbella.
  • Check that there are no residues on the casings, since this is undoubtedly a cause for concern.
  • Remove the ducts with all the screws and nuts that will hold the turbo.
  • Remove the faulty turbo from this seat marbella.
  • Refit the all-new turbo, checking that the locations are exactly right
  • Replace the oil return pipe
  • Fit all required screws and nuts
  • Fill the turbo with oil from your syringe
  • Operate the turbine with your hands so as to operate the turbo.
  • Reconnect all the turbo connections of this seat marbella.
  • Now that when all the components turn out to be assembled, you can start the engine block and run it for ten minutes.

Now that everything is installed and screwed and of course that the engine has been running for ten minutes, you will be able to walk around with this seat marbella in order to check that the assembly works properly. It is also advisable to check the quantity of oil but also water fairly frequently in the weeks that follow. Leave a comment if you have ever used our tutorial. Enjoy again!