Now there are turbos in a lot of new automobiles, whether in engines essences ou Diesel. Before starting this task it is of course necessary to be convinced that the malfunction occurs from the turbo of your seat terraavis. However, since you are reading this article, it means that you probably know the reason.change-turbo-seat-terraavis

How to change the turbo of your seat terraavis

Depending on the turbo to be presented, some of the procedures may change a little. In case you get a turbo it will be systematically delivered with a realization manual. It is best to follow it point by point. But in the event that you have not purchased the product, we suggest the operations to be done in order to change a turbo compressor for a seat terraavis. In this way you will know if you are capable of it or not. Just before you start, be careful to bring all of the tools indispensable. You are going to use your bucket for engine oil, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Most of the time, the turbos will be supplied with a mounting kit which includes some jointsFew studs as well as a little oil. However, we suggest that you have a professional check it out simply because tinkering with a pit is much easier for these processes. In addition, the turbo is a very sensitive constituent in a seat terraavis. Even if the operation is not downright complicated, it is still advisable to go to a professional.

  • Drain the engine block and change your oil filter. Add a small amount of oil. This is an essential procedure!
  • Remove the different plugs around the turbo of the seat terraavis.
  • Watch that there are no foreign bodies at the casings, since this can be a source of concern.
  • Remove the conduits and of course all the screws but also the nuts which will hold your turbo.
  • Remove the existing turbo from your seat terraavis.
  • Set up the new turbo, checking that the locations are suitable precisely
  • Refit the oil return pipe
  • Install all of the screws and nuts you removed
  • Fill the turbo with the oil supplied with the turbo
  • Manually start the turbine to activate the turbo.
  • Connect the different components to the turbo of this seat terraavis.
  • As soon as all of the components are in place, you can start the engine block and let it run for a few minutes.

Now that the assembly is installed and the engine has been running for a few minutes, you must drive your seat terraavis to check that everything is working well. We also advise you to check the oil and water level often enough for 15 days. Post a comment if this guide served you. Enjoy the road!