Now we find these turbos in most automobiles of the past 20 years, whether in systems essences ou Diesel. Before starting these manipulations it must of course be certain that the problem comes from the turbo of your seat toledo. However, since you've gotten this far, it means you probably know the cause.
How to change the turbo of your seat toledo
Compared to the turbo to be installed, some of the manipulations may fluctuate slightly. As soon as you buy a turbo it is usually supplied with an assembly manual. The ideal is then that you follow it to the letter. That said, if you have still not made the purchase, you will find below the steps to follow so as to replace a turbo compressor on this seat toledo. In fact you will understand if you have the required skills. Before you start, you must have all the tools required. You will have the utility of a container for engine oil, a set of ratchet wrenches, flat pliers, allen wrenches as well as flat. Generally, these turbos are sold with a mounting kit that contains a few jointsFew studs and a portion oil. We still advise you to have a check done by a pro because working with a pit turns out to be more convenient for these processes. In addition, the turbo is an extremely fragile component for the seat toledo. Taking into account that the operation is not very complex, it is nevertheless advisable to go to a professional.
- Change the engine oil then replace this oil filter. Add a little oil, but not too much. This is an inevitable step!
- Remove all the plugs found on the turbo of your seat toledo.
- Watch that there are no residues in the casings, since this is undoubtedly a source of problem.
- Remove the conduits but also each of the screws and then the nuts which will hold this turbo.
- Remove the existing turbo from the seat toledo.
- Set up the brand new turbo, checking that the seals are completely suitable
- Replace the oil return pipe
- Replace all of the screws and nuts that you removed
- Fill the turbo with the oil supplied with the turbo
- Start the turbine by hand in order to activate the turbo.
- Reconnect all the components to the turbo of this seat toledo.
- Now that when all the parts are assembled, you can start the engine and run it for ten minutes.
Now that everything is installed and screwed and the car has been running for ten minutes, you must drive the seat toledo so that you can see that everything is working properly. We also advise you to check the oil level but also the water level fairly frequently in the coming days. Write a comment if our text helped you. See you soon !