Now we find the turbos on a lot of new vehicles, whether they are systems essences ou Diesel. Before starting the DIY it is obviously necessary to be persuaded that the trouble arises from the turbo of this Suzuki Wagon R +. Having said that, since you are on this page, it means that you most likely know the cause.change-turbo-Suzuki-Wagon-R +

How to change the turbo of your Suzuki Wagon R +

Compared to the turbo to install, the processes will be able to change a little. When you buy a turbo it will usually be sold with an achievement note. The best is therefore that you follow it to the letter. However, if you have not yet purchased the product, here are the guidelines for replacing a turbo compressor in the Suzuki Wagon R +. This way you will know whether you are capable of it or not. Before starting, make sure you have all of the tools required. You will have the use of a receptacle for engine oil, a set of ratchets, your flat pliers, allen wrenches as well as flats. Often, turbos are sold with a set of utensils including joints, studs but also a portion oil. Despite everything, it is advisable to have a mechanic checked because working with a pit remains much more practical to carry out this kind of manipulation. What's more, the turbo is a fairly sensitive component on this Suzuki Wagon R +. Taking into account that the operation is not very laborious, it is nevertheless advisable to go to a mechanic.

  • Change the engine block oil then replace this oil filter. Add a little oil, but very little. This is an inevitable procedure!
  • Remove all the plugs found around the turbo of the famous Suzuki Wagon R +.
  • Check that no undesirable elements are found within the housings, because that can be a source of malfunction.
  • Remove the ducts and of course all the screws and nuts which will maintain this turbo.
  • Remove the faulty turbo from your Suzuki Wagon R +.
  • Reassemble the new turbo, checking that the gaskets are precisely suitable
  • Replace the oil return pipe
  • Replace the screws and nuts that you removed
  • Fill the turbo using the oil supplied with the turbo
  • Operate the turbine manually so that the turbo turns.
  • Connect all the components to the turbo of this Suzuki Wagon R +.
  • Once the components are assembled, you will be able to turn on the engine block and run it for 5 to 10 minutes.

Once the turbo is in place and the car has been running for 5 to 10 minutes, you will be able to take your Suzuki Wagon R + for a ride to check that the assembly works well. We advise you at the same time to check the quantity of oil but also of water regularly for 15 days. Post a comment if this tutorial was helpful to you. Good walk !