Now there are turbos on a lot of cars from the last 20 years, whether it's for systems essences ou Diesel. Before starting this task you will obviously have to be sure that the malfunction comes from the turbo of your Volkswagen 1200. But if you are reading us, this means that you probably know the source.
How to change the turbo on your Volkswagen 1200
Compared to the turbo, some of the manipulations may change very slightly. If you get a turbocharger, it will always be supplied with an assembly manual. It is best to follow it point by point. However if you have not purchased the product, we offer the main lines to replace a turbo compressor in the Volkswagen 1200. So you will know if you have the skills. Before starting, you must have all of the tools adequate. You will need your bucket for oil, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Often, turbos will be sold with their mounting kit which includes some jointsFew studs and a little oil. We nevertheless recommend that you go to a pro since working from a pit turns out to be much easier to carry out this work. And of course, the turbocharger happens to be a fairly fragile constituent on this Volkswagen 1200. Even if the handling is not very laborious, we still advise you to go to a professional.
- Drain the engine block then replace the oil filter. Add a little oil, but not too much. This is a necessary procedure!
- Remove the various plugs there are on the turbocharger of the famous Volkswagen 1200.
- Check that there are no undesirable elements inside the housings, since this is undoubtedly a source of malfunction.
- Remove the ducts as well as all of the screws and nuts which hold the turbocharger.
- Remove the turbocharger in place in your Volkswagen 1200.
- Install the famous turbocharger, checking that the locations stick completely
- Fit the oil return pipe
- Install all necessary screws and nuts
- Fill the turbocharger with the supplied oil
- Operate the turbine with your hands to operate the turbocharger.
- Connect the different components to the turbocharger of this Volkswagen 1200.
- As soon as all the components are installed, you will be able to start the engine block and let it run for 5 to 10 minutes.
Now that everything is in order but also that the car has been running for at least 5 minutes, you need to get behind the wheel of your Volkswagen 1200 to check that the unit is working properly. It is also advisable to check the oil and water level regularly in the weeks that follow. Write a comment if our text was helpful. Good walk !