Now there are turbos on a lot of new cars, whether in engines essences ou Diesel. Just before starting the DIY it is obviously necessary to be sure that the problem arises with the turbo of the famous Volkswagen 411. However, since you are reading this article, it means that you certainly know the source.change-turbo-Volkswagen-411

How to change the turbo on your Volkswagen 411

Compared to the turbo to install, the procedures may change very slightly. As soon as you buy a turbo it will always be provided with an achievement note. The best thing to do is therefore to read it. However, if you have not purchased the product, you will find below the operations to do in order to replace a turbo on the Volkswagen 411. Subsequently you will know what capacities are necessary. Just before you start, make sure you have all of the tools required. You will need a container for engine oil, a set of ratchets, flat pliers, your allen and flat wrenches. Typically, these turbos will be sold with their mounting kit which contains joints, studs and a syringe oil. It is still advisable to go see a specialist since working from a pit is easier to do the work. What's more, the turbo remains an extremely sensitive element for the Volkswagen 411. Taking into account that the technique is not extremely complicated, it is still advisable to go to a mechanic.

  • Drain the engine block then replace this oil filter. Add a little oil, but not too much. It is an inevitable manipulation!
  • Remove all the plugs found on the turbo of your Volkswagen 411.
  • Examine that there are no residues within the crankcases, since this is sometimes a source of concern.
  • Remove the ducts with all the screws but also the nuts which hold this turbo.
  • Remove the faulty turbo from the Volkswagen 411.
  • Install the famous turbo, checking that the locations stick perfectly
  • Refit the oil return pipe
  • Replace all the screws and nuts you removed
  • Fill the turbo with oil from your syringe
  • Operate the turbine manually to turn the turbo.
  • Assemble all the components to the turbo of your Volkswagen 411.
  • Once all the components turn out to be installed, you will start the engine block and let it run for about ten minutes.

Once everything is in order, but also that the engine has been running for at least 5 minutes, you need to get behind the wheel of the Volkswagen 411 in order to check that everything is running smoothly. We also advise you to check the level of oil but also of water regularly in the following weeks. Post a comment if our guide was helpful to you. Good walk !