Now we find these turbos on a lot of cars in circulation, whether in systems essences ou Diesel. Just before starting these manipulations we will naturally have to be sure that the problem arises from the turbo of this Volkswagen Bora. That said, since you are reading this article, it means you probably know the cause.
How to change the turbo on your Volkswagen Bora
Depending on the turbo to be presented, the methods may fluctuate very slightly. When you buy a turbo it will be systematically sold together with a manual. The ideal is as you read it. However if you have not bought the product yet, here are the steps to take in order to replace a turbo compressor for this Volkswagen Bora. Thereafter you will know what capabilities are needed. Before you start, you must have all of the tools adequate. You will need a container for the oil, a set of ratchet wrenches, flat pliers, allen and flat wrenches. In general, these turbochargers will be supplied with a lot of utensils which includes some jointsFew studs but also a portion oil. We still advise you to go to a garage since tinkering with a pit is much easier for these processes. What's more, the turbo turns out to be an extremely fragile component for the Volkswagen Bora. Taking into account that the operation is not extremely difficult, we nevertheless advise you to go to a mechanic.
- Drain the engine then replace the oil filter. Put a bit of oil, but not too much. This is an essential step!
- Remove all the plugs from the turbo of the famous Volkswagen Bora.
- Check that there are no foreign bodies inside the housings, because this is undoubtedly a cause for concern.
- Remove the conduits and of course all the screws but also the nuts which will allow the turbo to hold.
- Remove the turbo in place in this Volkswagen Bora.
- Refit the all-new turbo, checking that the slots stick completely
- Refit the oil return pipe
- Fit each of the necessary screws and nuts
- Fill the turbo using the oil provided
- Rotate the turbine by hand to activate the turbo.
- Refit all the elements to the turbo of the Volkswagen Bora.
- Now that when each of the components turns out to be in place, you can start the engine and let it run for about ten minutes.
Now that everything is in place and of course the car has been running for a few minutes, you need to drive with this Volkswagen Bora in order to check that everything is working properly. We also recommend that you check the oil and water level fairly often in the coming days. Post a comment in case this file helped you. Enjoy the road!