Now we find turbos on many new automobiles, whether in engines essences ou Diesel. Before starting to do DIY you must obviously be convinced that the malfunction came from the turbo of this Kia Cee D 2 Sw. However if you are reading to us, this means that you certainly know the reason.change-turbo-Kia-Cee-D-2-Sw

How to change the turbo on your Kia Cee D 2 Sw

Compared to the turbo to be presented, some of the methods may change a bit. As soon as you get a turbocharger it is always supplied with a performance note. The ideal is therefore to follow it point by point. That said, in the event that you have still not purchased the product, find out how to replace a turbo compressor for your Kia Cee D 2 Sw. Therefore you will know if you have the skills. Before starting, make sure you have all of the tools required. You are going to have the utility of a container for engine oil, a set of ratchet wrenches, flat pliers, your allen keys as well as flat. In general, turbochargers will be supplied with their lot of utensils including joints, studs as well as a little oil. However, we advise you to have it checked by a specialist because tinkering with a pit is more practical for carrying out these procedures. In addition, the turbocharger turns out to be a really fragile element on this Kia Cee D 2 Sw. Taking into account that the technique is not super difficult, we nevertheless advise you to go to a garage.

  • Drain the engine block then replace your oil filter. Replace a little oil, but not too much. This is an inevitable procedure!
  • Remove all the plugs from the Kia Cee D 2 Sw turbocharger.
  • Check that there are no foreign bodies in the housings, since this is undoubtedly a cause of malfunction.
  • Remove the ducts as well as each of the screws and nuts that will allow your turbocharger to hold.
  • Remove the faulty turbocharger from your Kia Cee D 2 Sw.
  • Install the famous turbocharger, checking that the locations correspond precisely
  • Refit the oil return pipe
  • Fit all the required screws and nuts
  • Fill the turbocharger with the supplied oil
  • Manually rotate the turbine to operate the turbocharger.
  • Reattach all components to the turbocharger of this Kia Cee D 2 Sw.
  • Now that when all the components are in place, you can turn on the engine block and run it for 5 to 10 minutes.

Now that everything is in order and of course the car has been running for a few minutes, you need to take a drive behind the wheel of your Kia Cee D 2 Sw to check that the whole thing is working well. We also advise you to check the quantity of oil but also of water regularly in the following weeks. Post a comment in case our file has been useful. Good road !