Now we find the turbos in most cars on the market, as many on systems essences ou Diesel. Before starting these manipulations it is obviously necessary to be convinced that the problem arises from the turbo of the famous Opel Omega 2. However, since you are reading this article, it is because you most likely know the cause.change-turbo-Opel-Omega-2

How to change the turbo of your Opel Omega 2

Depending on the turbo to be installed, some of the manipulations may vary a little. When you get a turbo it will usually be sold with a manual. The ideal is therefore that you follow it to the letter. However if you have not yet made the purchase, here are the main axes so as to change a turbo compressor for your Opel Omega 2. This way you will understand if you have the required skills. Before you start, you must have all of the tools required. You will be using your oil container, a set of ratchet wrenches, flat pliers, allen and flat wrenches. Typically, these turbos come with a lot of utensils including some jointsFew studs and a dose oil. It is still advisable to go see a professional because working with a pit is much more convenient to do this work. And of course, the turbo remains a rather delicate element on the Opel Omega 2. Taking into account that the technique is not really difficult, it is nevertheless advised to go to a mechanic.

  • Change the engine, then change your oil filter. Add a little oil, without putting too much. It's an imperative phase!
  • Remove all the plugs present on the turbo of your Opel Omega 2.
  • Check that there are no foreign bodies inside the housings, since this can be a source of concern.
  • Remove the conduits as well as all the screws but also the nuts which will maintain your turbo.
  • Remove the existing turbo from this Opel Omega 2.
  • Reassemble the famous turbo, checking that the locations correspond precisely
  • Replace the oil return pipe
  • Fit all the necessary screws and nuts
  • Fill the turbo with the oil supplied with the turbo
  • Operate the turbine manually to turn the turbo.
  • Reconnect all the elements to the turbo of this Opel Omega 2.
  • Once all of the components turn out to be in place, you will turn on the engine and run it for 5 to 10 minutes.

Once the assembly is installed but also that the car has been running for some time, it is necessary to walk around in this Opel Omega 2 in order to verify that the assembly works properly. It is also advisable to check the oil and water level fairly frequently for 15 days. Leave a comment in case this tutorial helped you. Enjoy the road!