Now we can find these turbos on a lot of cars in circulation, whether for systems essences ou Diesel. Just before starting the DIY you will obviously have to be convinced that the trouble arises from the turbo of your Smart Crosstown. However, if you are on this page, it means that you most likely know the cause.change-turbo-Smart-Crosstown

How to change the turbo of your Smart Crosstown

Depending on the turbo to be positioned, processes may vary slightly. In the event that you get a turbo this is usually going to be supplied along with a performance note. The best is then to follow it point by point. However, if you still have not made the purchase, we offer the main axles to replace a turbo on a Smart Crosstown. Therefore you will understand if you have the skills. Just before you start, make sure you have all of the tools required. You will need your container for the oil, a set of ratchets, your flat pliers, your allen wrenches as well as your flat keys. In general, the turbos will come with a mounting kit which contains a few jointsFew studs but also a little oil. We still recommend that you go see a pro since working from a pit turns out to be much easier to carry out these manipulations. What's more, the turbo just happens to be a really delicate component in a Smart Crosstown. Even though the operation is not really laborious, we nevertheless advise you to go to a technician.

  • Drain the engine and replace this oil filter. Put a bit of oil, in small quantity. Here is an imperative manipulation!
  • Remove all the plugs present on the turbo of this Smart Crosstown.
  • Check that no foreign bodies are found in the crankcases, since this can be a source of malfunction.
  • Remove the ducts with each of the screws but also the nuts which will support this turbo.
  • Remove the turbo in place in your Smart Crosstown.
  • Fit the new turbo, checking that the joints stick precisely
  • Fit the oil return pipe
  • Install all required screws and nuts
  • Fill the turbo with the oil supplied with the turbo
  • Operate the turbine manually so that the turbo turns.
  • Reattach all the components to the turbo of the Smart Crosstown.
  • Once all of the parts are found to be in place, you will turn on the engine and let it run for 5 to 10 minutes.

Now that the turbo is in place and of course the car has been running for 5-10 minutes, you should drive your Smart Crosstown so that the assembly is running smoothly. We also advise you to check the quantity of oil but also of water quite frequently in the following weeks. Post a comment if this tutorial was useful to you. Enjoy again!