The advantage of an electric window regulator is undeniable in comparison with manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not necessarily easy to identify precisely the cause of the failure. With this article we will see how to replace the electric window regulator of a seat toledo . But before seeing the procedure to follow, you must be sure to understand where the failure comes from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple small repair can sometimes be enough. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you've identified the source of the problem, let's get back to our topic.change-window-regulator-seat-toledo

Replacing a seat toledo window regulator: how to do it

Changing a window regulator is relatively tedious. Depending on your expertise on the subject, count about two o'clock to make sure you have the time you need. Whether it is on a seat toledo or on another car, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take photos at several stages in order to help you reassemble the new window regulator.

Removing a window regulator on a seat toledo

  • Remove the entire door trim. From the handle to the mirror cover. This should be done relatively carefully with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being obstructed. This manipulation is quite long to execute.
  • Remove the window regulator seals from your seat toledo. Again, it is wiser to take it delicately.
  • Now that you have access to the window regulator, remove the connectors. You must then remove the motor from the window regulator if it is blocked.
  • Release all the fasteners that hold the glass, then remove it. It is sometimes advisable to position the window halfway up to be able to carry out this operation. Of course we will have to be extremely careful when moving the glass. It is advisable to put it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is wiser to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held in place by screws or rivets, so you must remove them.

Installation of an electric window regulator for a seat toledo

  • Position the new window regulator. Make sure that its location is identical to the previous window regulator. You will certainly have to use the bindings you have set aside.
  • Reposition the glass just as you removed it. At times it will be necessary to move it slightly so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace the entire door trim.

That's it, you now have a new and functional window regulator . So you have to put the ignition on and test it.