The advantage of an electric window regulator is enormous in comparison with manual window regulators. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to identify precisely the nature of the problem. In this article, we will see how to change the electric window regulator of a Volkswagen Buggy . But before seeing the procedure to follow, you must be certain to know where the dysfunction came from. Let us be clear, it is from time to time unnecessary to replace the entire window regulator, a simple repair will sometimes work. Whether it's a false contact, or simply a lack of lubrication. Now that you are sure of the source of the problem, let's get to the heart of the matter.change-window-regulator-Volkswagen-Buggy

Replacing a Volkswagen Buggy window regulator: how to do it

Changing a window regulator is relatively tedious. Depending on your experience in the field, count about two o'clock to make sure you have the time you need. Whether for a Volkswagen Buggy or another car, this manipulation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. It is advisable to take pictures at different times to help you mount the new window regulator.

Removing a window regulator on a Volkswagen Buggy

  • Remove the entire door trim. From the mirror cover to the handle. This should be done relatively gently using a flat screwdriver. You must ensure that you access the window regulator at all points without being disturbed. This step is quite long to perform.
  • Disassemble the window regulator seals from your Volkswagen Buggy. Again, it's important to be careful.
  • Now that you have accessed the window regulator, remove the connectors. You will then have to remove the motor from the window regulator when the window is stuck.
  • Release all the fasteners that hold the window, then take it out. It is from time to time preferable to position the window halfway up to be able to carry out this manipulation. Of course we will have to be very careful when handling the glass. It is best to place it on a rather thick sheet.
  • Disassemble the window regulator as a whole. It is important to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Volkswagen Buggy

  • Introduce the new window regulator. Make sure that its location is similar to the damaged window regulator. You probably need to use the bindings you have set aside.
  • Replace the glass as you removed it. It will be necessary from time to time to rotate it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace the entire door trim.

It's done, you now have a new and functional window regulator . You will have to put the ignition on and test it.