The advantage of an electric window regulator is substantial in comparison with manual systems. However, it has the disadvantage of being much more complex in terms of repairs. Also, it is not necessarily easy to determine precisely the cause of the failure. With this article, we will see how to replace the electric window regulator of an Opel Mokka X . But before you start, you need to be sure you understand where the failure is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair will often suffice. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the cause of the concern, let us return to our subject.change-window-opel-Opel-Mokka-X

Replacing an Opel Mokka X window regulator: how to do it

The replacement of a window regulator is rather long. Depending on your experience in the field, count approximately three hours to make sure you have the time you need. Whether it is on an Opel Mokka X or on another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take photos at different times to help you assemble the new window regulator.

Removing a window regulator on an Opel Mokka X

  • Dismantle the entire door trim. From the handle to the mirror cover. This should be done rather gently with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being embarrassed. This step is the longest to execute.
  • Remove the window regulator seals from your Opel Mokka X. Again, this is essential to do so with care.
  • Now that you have access to the window regulator, disconnect the connectors. You will then have to disengage the window lifter motor if it is ever stuck.
  • Release all the fasteners that hold the glass, then remove it. It is sometimes advisable to place the window halfway up to be able to carry out this manipulation. Obviously you have to be very careful when handling the glass. It is best to put it on a sufficiently thick sheet.
  • Remove the window regulator entirely. It is essential to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held in place by screws or rivets, you must therefore remove them.

Installing an electric window regulator on an Opel Mokka X

  • Fit the new window regulator. Make sure that its location is identical to the previous window regulator. You should definitely use the fasteners you have set aside.
  • Replace the glass as you removed it. It will sometimes be necessary to rotate it slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Refit all of the door trim.

That's it, you now have a new and functional window regulator . You will therefore have to turn on your car and test it.