The advantage of an electric window regulator is substantial in comparison with manual window regulators. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to identify precisely the nature of the problem. With this article, we will discover how to change the electric window regulator of an Opel Mokka . But before seeing the procedure to follow, you must be sure to know where the problem comes from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair will sometimes work. Whether it concerns an electrical short circuit, or simply a lack of oiling. Now that you've identified the source of the problem, let's get back to our topic.change-window-opel-Opel-Mokka

Replacing an Opel Mokka window regulator: how to do it

Changing a window regulator is relatively long. Depending on your expertise in the field, count approximately two o'clock to make sure you have the time you need. Whether for an Opel Mokka or another car, this manipulation is for experienced DIY enthusiasts. So let's look at what to do, step by step. We advise you to take photos at different times to help you install the new window regulator.

Removing a window regulator on an Opel Mokka

  • Dismantle the entire door trim. From the handle to the mirror cover. This should be done relatively carefully using a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This step is the longest to perform.
  • Remove the window regulator seals from your Opel Mokka. Again, it is important to take it delicately.
  • Now that you have access to the window regulator, remove the connectors. You can then remove the motor from the window regulator when it is stuck.
  • Remove all the fasteners that hold the glass, then release it. It is sometimes better to position the window halfway up to be able to carry out this operation. Obviously, extreme care must be taken when moving the glass. It is advisable to put it on a rather thick sheet.
  • Remove the window regulator entirely. It is important to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, so it will be necessary to remove them.

Installing an electric window regulator on an Opel Mokka

  • Position the new window regulator. Make sure that its position is identical to the damaged window regulator. You should certainly use the fasteners you have removed.
  • Replace the glass in the same way as you removed it. It will sometimes be necessary to rotate it a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace all of the door trim.

It's good, you now have a new and functional window regulator . So you can put the ignition on and test it.