The advantage of an electric window regulator is enormous compared to manual window regulators. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the cause of the problem. With this article, we will discover how to replace the electric window regulator of an Opel Monza . But before seeing the procedure to follow, you must be certain of knowing where the dysfunction comes from. Indeed, it is regularly useless to change the whole window regulator, a simple small repair will sometimes work. Whether it's a false contact, or simply a lack of lubrication. Now that you've identified the nature of the concern, let's get to the heart of the matter.change-window-opel-Monza

Replacing an Opel Monza window regulator: how to do it

Replacing a window regulator is quite tedious. Depending on your expertise in the field, count approximately three hours to make sure you don't get caught up in time. Whether it is on an Opel Monza or on another car, this manipulation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take photos at several stages to help you reassemble the new window regulator.

Removing a window regulator on an Opel Monza

  • Dismantle the entire door trim. From the mirror cover to the handle. This should be done very gently using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This manipulation is quite long to perform.
  • Remove the window regulator seals from your Opel Monza. Again, it is wiser to take it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You will then have to remove the motor from the window regulator in case it is blocked.
  • Release all the fasteners that hold the glass, then take it out. It is regularly more advisable to position the window halfway up to be able to carry out this operation. Of course you will have to be very careful when handling the glass. It is advisable to place it on a rather thick sheet.
  • Remove the window regulator completely. It is wiser to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly held by screws or rivets, so you must remove them.

Installing an electric window regulator from an Opel Monza

  • Introduce the new window regulator. Make sure that its location is identical to the previous window regulator. You will probably have to use the fasteners you removed.
  • Replace the glass just as you removed it. It will regularly be necessary to rotate it slightly so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Refit all of the door trim.

It's good, you now have a new and working window regulator . You will therefore have to switch on and test it.