The advantage of an electric window regulator is undeniable in comparison with manual window regulators. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to identify precisely the origin of the problem. With this article we will see how to repair the electric window regulator of an Opel Rak E . But before seeing the procedure to follow, you must be certain to understand where the failure came from. Let's be clear, it is from time to time unnecessary to change the entire window regulator, a simple small repair can sometimes be enough. Whether it's a false contact, or just a lack of lubrication. Now that you are sure of the source of the problem, let's get to the heart of the matter.change-window-opel-Rak-E

Replacing an Opel Rak E window regulator: how to do it

Changing a window regulator is rather tedious. Depending on your expertise on the subject, count about two o'clock to make sure you have the time you need. Whether it is for an Opel Rak E or on another vehicle, this repair is for experienced DIY enthusiasts. So let's look at how to do it, step by step. We advise you to take photos at several stages to help you reassemble the new window regulator.

Removing a window regulator on an Opel Rak E

  • Remove the entire door trim. From the handle to the mirror cover. This should rather be done with care using a flat screwdriver. It will be necessary to make sure to have access to the window regulator in any point without being obstructed. This step is the longest to complete.
  • Remove the window regulator seals from your Opel Rak E. Again, it is essential to do this gently.
  • Now that you have accessed the window regulator, disconnect the connectors. You must then release the window lifter motor when it is blocked.
  • Take out all the fasteners that hold the glass, then release it. It is from time to time advisable to place the window halfway up to be able to carry out this manipulation. Of course, great care must be taken when moving the glass. It is advisable to place it on a rather thick sheet.
  • Remove the window regulator entirely. It is essential to remember your position well. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, so you must remove them.

Installing an electric window regulator on an Opel Rak E

  • Present the new window regulator. Make sure that its position is identical to the damaged window regulator. You will certainly need to use the bindings you have set aside.
  • Replace the glass just as you pulled it out. It will be necessary from time to time to make it move slightly so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Refit the entire door trim.

It's done, you now have a new and working window regulator . So you need to turn on your car and test it.