The advantage of an electric window regulator is undeniable in comparison with manual mechanisms. However, it has the defect of being much more complicated in terms of repairs. In addition, it is not necessarily easy to pinpoint the origin of the problem. In this article we will see how to replace the electric window regulator of an Opel Rekord . But before you start, you need to be sure you understand where the failure came from. Indeed, it is regularly unnecessary to change the entire window regulator, a simple small repair will sometimes suffice. Whether it concerns a false contact, or simply a lack of oiling. Now that you are sure of the nature of the dysfunction, let's get to the heart of the matter.change-window-opel-Opel-Rekord

Replacing an Opel Rekord window regulator: how to do it

Replacing a window regulator is rather time-consuming. Depending on your expertise in the field, plan approximately three hours to make sure you don't get caught up in time. Whether it is on an Opel Rekord or on another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take pictures at several stages to help you reassemble the new window regulator.

Removing a window regulator on an Opel Rekord

  • Remove the entire door trim. From the mirror cover to the handle. This should be done rather gently using a flat screwdriver. You will have to make sure you have access to the window regulator at any point without being disturbed. This manipulation is the longest to execute.
  • Remove the window regulator seals from your Opel Rekord. Again, it is crucial to do it carefully.
  • Now that you have accessed the window regulator, disconnect the connectors. You will then have to disengage the motor from the window regulator if it is blocked.
  • Release all the fasteners that hold the window, then take it out. It is regularly preferable to place the window halfway up to be able to carry out this manipulation. Of course you will have to be very careful when moving the glass. It is advisable to place it on a sufficiently thick sheet.
  • Remove the window regulator as a whole. It is essential to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is regularly held in place by screws or rivets, so they must be removed.

Installing an electric window regulator on an Opel Rekord

  • Position the new window regulator. Make sure that its position is similar to the damaged window lifter. You will probably need to use the fasteners that you removed.
  • Replace the glass as you removed it. It will regularly be necessary to move it slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace the entire door trim.

That's it, you now have a new and functional window regulator . So you will need to turn on your car and test it.