The advantage of an electric window regulator is therefore compared to manual mechanisms. Nevertheless, it has the defect of being much more complex in terms of repairs. In addition, it is not always easy to identify precisely the source of the failure. With this article, we will see how to change the electric window regulator of an Opel Senator . But before you start, you need to be sure you know where the problem came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can sometimes work. Whether it concerns a false contact, or just a lack of lubrication. Now that you've identified the nature of the problem, let's get back to our topic.change-window-opel-Senator

Replacing an Opel Senator window regulator: how to do it

Replacing a window regulator is relatively time-consuming. Depending on your experience on the subject, plan approximately two o'clock to make sure you have the time you need. Whether for an Opel Senator or another car, this repair is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at several stages to help you assemble the new window regulator.

Removing a window regulator on an Opel Senator

  • Dismantle the entire door trim. From the mirror cover to the handle. This should be done relatively gently with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being obstructed. This step is the longest to perform.
  • Remove the window regulator seals from your Opel Senator. Again, it is wiser to take it delicately.
  • Now that you have access to the window regulator, disconnect the connectors. You can then remove the motor from the window regulator in case it is stuck.
  • Remove all the fasteners that hold the glass, then release it. It is sometimes better to place the window halfway up to be able to carry out this operation. Obviously you will have to be very careful when handling the glass. It is best to put it on a rather thick sheet.
  • Remove the window regulator completely. It is wiser to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held by screws or rivets, so it will be necessary to remove them.

Installing an electric window regulator on an Opel Senator

  • Fit the new window regulator. Make sure that its position is identical to the damaged window regulator. You will probably have to use the fixings that you removed.
  • Replace the glass just as you removed it. It will sometimes be necessary to rotate it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Refit all of the door trim.

That's it, you now have a new and working window regulator . So you can put the ignition on and test it.