The advantage of an electric window regulator is undeniable compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the origin of the fault. With this article, we will discover how to fix the electric window regulator on a Kia Carens 3 . But before seeing the procedure to follow, you must be certain of knowing where the problem came from. Indeed, it is from time to time useless to change the whole window regulator, a simple small repair will sometimes be enough. Whether it's a false contact, or just a lack of oiling. Now that you are sure of the source of the concern, let us return to our subject.change-window-lift-Kia-Carens-3

How to replace a Kia Carens 3 window regulator

Changing a window regulator is quite time consuming. Depending on your expertise in the field, count approximately three hours to make sure you don't get caught up in time. Whether it's for a Kia Carens 3 or another vehicle, this repair is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at different times to help you install the new window regulator.

Removing a window regulator on a Kia Carens 3

  • Remove the entire door trim. From the handle to the mirror cover. This should be done with enough caution with a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being embarrassed. This step is the longest to perform.
  • Remove the window regulator seals from your Kia Carens 3. Again, it is essential to do this gently.
  • Now that you have access to the window regulator, disconnect the connectors. You will then have to disengage the window lifter motor if it is blocked.
  • Release all the fasteners that hold the window, then release it. It is from time to time more judicious to place the window halfway up to be able to carry out this manipulation. Of course, great care must be taken when moving the glass. It is advisable to place it on a rather thick sheet.
  • Remove the window regulator entirely. It is essential to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, so you will need to remove them.

Installing a Kia Carens 3 electric window regulator

  • Position the new window regulator. Make sure that its position is similar to the previous window regulator. You will certainly have to use the bindings you have set aside.
  • Reposition the glass just as you removed it. It will be necessary from time to time to make it move a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Replace the seals you removed.
  • Replace the entire door trim.

It's done, you now have a new and working window regulator . You will therefore have to switch on and test it.