The advantage of an electric window regulator is substantial in comparison with manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not always easy to determine precisely the origin of the failure. With this article, we will discover how to change the electric window regulator of a Kia Cee D . But before you start, be sure you understand where the problem is coming from. Indeed, it is at times unnecessary to change the entire window regulator, a simple small repair can sometimes be enough. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the nature of the dysfunction, let's get to the heart of the matter.change-window-lift-Kia-Cee-D

Replacing a Kia Cee D window regulator: how to do it

Replacing a window regulator is quite tedious. Depending on your experience on the subject, count about three hours to make sure you don't get caught up in time. Whether it is on a Kia Cee D or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take pictures at several stages to help you assemble the new window regulator.

Removing a window regulator on a Kia Cee D

  • Remove the entire door trim. From the mirror cover to the handle. This should be done with enough caution using a flat screwdriver. You must ensure that you access the window regulator at all points without being disturbed. This step is the longest to complete.
  • Remove the window regulator seals from your Kia Cee D. Again, it's important to do it gently.
  • Now that you have accessed the window regulator, disconnect the connectors. You will then have to disengage the motor from the window regulator when it is stuck.
  • Remove all the fasteners that hold the glass, then take it out. It is sometimes preferable to position the window halfway up to be able to carry out this manipulation. Of course you will have to be extremely careful when handling the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator entirely. It is important to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times maintained by screws or rivets, you must therefore remove them.

The installation of an electric window regulator of a Kia Cee D

  • Present the new window regulator. Make sure that its location is identical to the previous window regulator. You will probably have to use the fasteners you have set aside.
  • Reposition the glass just as you took it out. At times it will be necessary to rotate it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Replace the seals that you have carefully removed.
  • Reassemble the door trim assembly.

It's done, you now have a new and functional window regulator . You will therefore have to switch on and test it.